Evaporust

[chris85]

This is some pretty cool stuff. Has anyone else used it before? After some degreaser and pressure washing I soaked my steering box in it over night and here are the results. Then once the fluid is "spent" just spray it on your grass. Beats having to take a drain pan to the oil change place all the time.







You can see where the line where it was submerged. Turned it over and gonna give it another night to sit before rebuild and painting.

 

[chris85]

another

 

[skunked]

Yes I use it all the time. As long as you degrease the parts first it works awesome.

 

[6872xtc]

We have been using it for some things on my son's truck. That has turned into cleaning lots of parts. It is great for bolts and things that are tedious to blast. We made a tank for the radiator support. We figured that would get in where blasting couldn't before powder coating.

 

[sweetk30]

have had good luck with metal rescue also . http://www.summitracing.com/search/...&tw=rust re&sw=Metal Rescue Rust Remover Bath

and works real good with a little heat . got a aluminum cake pan and a hot plate it fit on at wallyworld and filled it up and turned it on to around 120* . makes it work real good aspr directions . they also have a anti rust coating for after use .

 

[diesel4me]

Believe it or not,plain old vinegar works pretty well too,for de-rusting things...I used some to remove some heavy rust on the inside of a master cylinder that had been left empty a long time,and it came out looking like new after I used a shop vac to suck it out...

I'd have to be careful using that Evapo-rust stuff,if I get any on my truck,I wont have a truck any more..I think the rust is holding a lot of it together....