Anyone know a source for these rubber pieces on the exhaust mounts? Cant seem to find them online. Was hoping to cut the rivets and replace the rubber.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Exhaust Mount Source
- Thread starter Rugby_7
- Start date
cut rivits off.
new bolts/washers/stover nuts
then fresh box cutter knife blade and sidewall of old tire for rubber strips.
I do it a lot when I need beefy rubber strips or pads.
new bolts/washers/stover nuts
then fresh box cutter knife blade and sidewall of old tire for rubber strips.
I do it a lot when I need beefy rubber strips or pads.
That's a good idea, alot cheaper too!
just don't use firestone wilderness at tires . . . .
the exhaust will fall off.
the exhaust will fall off.
A co-worker at the junkyard put some connecting rods on his exhaust for pipe hangers ,from a blown up motor !--he put some 3/8" fuel line in the wrist pin end for an anti-rattle bushing..guys with rat rods at a cruise night were highly impressed and said "why didn't I think of that ?"..
