MUD JUNKIE
1/2 ton status
whats the best way to cut out the front finders on a 79' pickup? cutoff wheel,sawzall,plazma cutter? and how can you cut the fronts theres not much metal to cut back.its got a 4"+3" and want 39"s or 40"s
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
fender cutting
- Thread starter MUD JUNKIE
- Start date
zakk
1/2 ton status
i am running 39.5's on a 6" lift.
see links below to see what was done and how-to.
see links below to see what was done and how-to.
Pure Insanity
1/2 ton status
Theres more there to take off than you think there is. Take a look at my pics and look at the parts truck pics. The fronts are about maxxed out. They could be cut back more but not much.
roostr3269
1/2 ton status
I'm runnin 11(8+3) inches with 39" Boggers and still need to do some trimmin. Not sure how I'm going to do it either, Keep us posted on what u do.
this might help
coloradok5.com/fendercut
coloradok5.com/fendercut
I used a sawsall. 6" lift with 39.5's. Check out my link for pics.
MUD JUNKIE
1/2 ton status
so use a air saw? or a sawzall? looks like theres alot more too cut out then i thought,thanks for the pics guys.my 39.5 tsl's will fit!!!or i'll make them fit.i want to keep a low center of gavity,and not have to lengthen the driveshafts,its a money situation /forums/images/icons/mad.gif
