Fender hacking...

[babyburb]

where can I find out how to do it. Mainly front fenders. I took a trip to the lake and got it twisted up and it tore up the new boggers a little. Im running 4" tuff countries with 38.5 boggers on the front.

I do not care about looks on this one so I just want to know the quick whacking steps! No pun intended.

 

[kennyw]

Go out and buy some good sawzall blades or a cut off wheel for your grinder, mark where you want to cut with masking tape, then hack away. There isn't much science to it.

 

[babyburb]

DO I need to try to keep my inner fender or just chop that out too.

 

[Hogback Fabrication]

You don't need to keep the inner fenders at all but they do add some rigidity and keep water/mud away from the engine.

 

[BGKYK5]

Here is a thread with the drawings from Yunits fender trimming write up. Can't find the actual write up at the moment.

 

[AZ79K5Project]

Here's the article from the home page:

http://coloradok5.com/fendertrim.shtml