Finished my axle swap

[i_4x4]

Just swapped my 10 bolt's w/ 3.73 & 31's (actually measured 29.5"). To a 14 bolt FF & D 44 w/ 4.56's & 33's (actually measure 32.5"). I gained 2" in the rear 1.5" in front, measured at top center of wheel opening. Gained 1.5" ground clearance at front diff. & no gain or loss at rear diff. Can't wait to try it out.

LET'S ROCK
Don't follow me you will get STUCK!!

 

[DBLAZER]

Congrats!!!!! And good luck

89 w/DANA 60-Corp 14 w/5:13s n Detroit's. 4"lift 2" body. NEW AtlassII ordered 5-15-00. 38" sx's -

 

[CK5]

Cool Ed, now get a Detroit for the back at least.

Steve

 

[CK5]

DBlazer, how do your 38's fit?

Steve

 

[TheBlazerKid]

congrats,im getting ready to do a similar swap myself

Your right I dont understand the jeep thing!?

 

[DBLAZER]

Ummmm, well, with a sawzall they fit nice. The rears stuff very well, but the front required some "trimming" in order to get the feling room I required. By the wa Steve, my case is being installed as we speak WOOOHOOOOO!!!!!!!


89 w/DANA 60-Corp 14 w/5:13s n Detroit's. 4"lift 2" body. NEW AtlassII ordered 5-15-00. 38" sx's -

 

[Blazerbob]

What was wrong with the 10 bolts?

<font color=blue>Blazerbob</font color=blue>

 

[i_4x4]

A Detroit, is in the work's. I just have to get the Warden (a.k.a. wife) to approve it. lol. Just needing a little more power to help my 305. Those 3.73's just didn't cut it.

i_4x4

LET'S ROCK
Don't follow me you will get STUCK!!

 

[**DONOTDELETE**]

You had better hurry up and get the request in, the paperwork will take forever if you're going through the warden!

<font color=red>BigBurb

<font color=purple>IF YOU'RE SCARED, SAY YOU'RE SCARED !!

 

[Gold Rush]

That's great Ed!!! Now why don't you head on up here for the run that RB and I are doing? It's posted on the Blazin Trails board. After seeing what your 31's mixed with your driving abilities let's see some 38's on there!

David

http://www.goldrush.coloradok5.com