Replaced all of my dash lights last weekend,but still had a problem,so I took it apart again,this is what I found,I have ordered some thin copper foil to fix this,has anyone come across this before and if you have how did you fix it ?CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Flexible circuit repair in gauge cluster
- Thread starter snowdriver
- Start date
Replaced all of my dash lights last weekend,but still had a problem,so I took it apart again,this is what I found,I have ordered some thin copper foil to fix this,has anyone come across this before and if you have how did you fix it ?
I usually just clean the plastic off of the copper, on each side, and solder a small wire across the gap. A little 2 part epoxy to glue it down.
I see that it is right where the bulb goes, so the copper foil should work. Solder it on either side. Use a very small soldering gun.
Kain
3/4 ton status
they make a product to fix this it brushes on
let me see if i can find it
let me see if i can find it
Kain
3/4 ton status
Keeep that in mind,may be a easy repair with a product that brushes on
