floor hump 4x4 and tail light harnness and lights

[sweetk30]

lookin for a floor pan setup that bolts in. also would like aroound 2-3" of the floor were it bolts to. i got a 81-up cab from 2wd and want to drop the body lift as i am gettin old and just wana run 35" tires or less.

also need a tail light harnness from firewall down to the tail lights for a longbed truck. prefer a nice clean setup . and lookin for the lights/lenses/hardware for the box. i got flatbed comin off and goin to box but no lights at this point.

let me know what ya got thanks.

 

[chevysmithz71]

What size lift did you have to run to clear the 2wd cab??

 

[obijuan]

never looked but we just pulled the body off an 85 k10 today, would that have the hump?

 

[sweetk30]

never looked but we just pulled the body off an 85 k10 today, would that have the hump?

prob . but might be solid pan . non bolt in. if i cant find good bolt in setup i would go the solid route and just weld it in.

 

[sweetk30]

What size lift did you have to run to clear the 2wd cab??

i had 465/205 and th400/205 its tight but clears with 2" body lift.

i am changin the truck around and redoin the body so the 2" body is goin bye bye. and i am gettin old / n / fat

 

[kennyw]

I think the bolt in pan is still hanging around from my '83 K20. I don't have the mating floor though. It was an auto truck with an NP208 shifter hole.

 

[4X4HIGH]

I have a bolt in hump I picked up from Wes a few years ago that i'm not going to be using now. I have no idea what year it came from and I also do not have any of the mating floor, just the hump. I'm into it 25.00 and would like to come close to breaking even but I have no idea what it would cost to ship it.

 

[Indy4x4Fab]

i also have a 79 k5 hump in great shape was a th350 np203 hump. but its just the bolt in hump.

 

[sweetk30]

no problem guys.

just waitin on the perfect deal at this point for me.

to cold to work outside now anyways.

 

[imiceman44]

no problem guys.

just waitin on the perfect deal at this point for me.

to cold to work outside now anyways.

If you are not in hurry I am cutting an 81 w/ th350/208

As for the tail light harness I will see how clean the one from the 83 is