SCJimmy
1/2 ton status
FS: Axle, driveshafts, 4\" lift springs, speakers, Fluke meter
10 bolt front axle from an '89 GMC Jimmy fullsize. 3.42 ratio
Axle was rebuilt with new Moog tierod and draglink, new Perfect Circle ball joints, Warn premium hubs, brake rotors, pads, and calipers. It also has a 4" raised steering arm. I rebuilt the axle, and drove the truck for 2 months before the rear gov lock blew up. Truck sat for 3 months while I got a D60 and 14bff together for it. Axle was stored at a friend's garage (thought he was buying it) outside. Everything's in great shape, rotors need the rust knocked off of them, probably needs calipers again, since the ass-nut didn't plug them up when it went outside.
$400 worth of new parts in it, gears and shafts good, will sell for $300 Prefer pick-up, willing to meet or deliver in SC-NC-GA areas.
Rough Country 4" front lift springs. ran for 1 month, then went to Tuff country EZ rides with the new D60. Complete with like-new bushings installed. $100+ride
1 pair of MTX Blue Thunder truck boxes. Three way, with a 10" bass driver in the front, mid and tweet in the top. Angles to fit behind truck seat. Work good, look their age, exterior banged up. $30+ride
Front/rear drive shafts off of an '89 GMC Jimmy full size. (241 x-fer case)
Decent shape and straight, slip-yoke rear had new joints before I went SYE. Good for trail spares or ??? $40/both+ride
Pair of D60 spring plates. Went with TonyP angled plates and shims, don't need them. $45+ride
Fluke 867B Graphical Multimeter Recent ni-cads, carry/storage case, charger. This meter is similar to the scope meter, but with limited scope functions. It does have different graphical trending, frequency, duty cycle, and logic functions. Case shows some wear, the meter works great. $580 ( Compare to new pricing )
Set of stock F/R springs from '89. great shape, free to good home. You pick up.
PM me for questions, pictures.
10 bolt front axle from an '89 GMC Jimmy fullsize. 3.42 ratio
Axle was rebuilt with new Moog tierod and draglink, new Perfect Circle ball joints, Warn premium hubs, brake rotors, pads, and calipers. It also has a 4" raised steering arm. I rebuilt the axle, and drove the truck for 2 months before the rear gov lock blew up. Truck sat for 3 months while I got a D60 and 14bff together for it. Axle was stored at a friend's garage (thought he was buying it) outside. Everything's in great shape, rotors need the rust knocked off of them, probably needs calipers again, since the ass-nut didn't plug them up when it went outside.
$400 worth of new parts in it, gears and shafts good, will sell for $300 Prefer pick-up, willing to meet or deliver in SC-NC-GA areas.
Rough Country 4" front lift springs. ran for 1 month, then went to Tuff country EZ rides with the new D60. Complete with like-new bushings installed. $100+ride
1 pair of MTX Blue Thunder truck boxes. Three way, with a 10" bass driver in the front, mid and tweet in the top. Angles to fit behind truck seat. Work good, look their age, exterior banged up. $30+ride
Front/rear drive shafts off of an '89 GMC Jimmy full size. (241 x-fer case)
Decent shape and straight, slip-yoke rear had new joints before I went SYE. Good for trail spares or ??? $40/both+ride
Pair of D60 spring plates. Went with TonyP angled plates and shims, don't need them. $45+ride
Fluke 867B Graphical Multimeter Recent ni-cads, carry/storage case, charger. This meter is similar to the scope meter, but with limited scope functions. It does have different graphical trending, frequency, duty cycle, and logic functions. Case shows some wear, the meter works great. $580 ( Compare to new pricing )
Set of stock F/R springs from '89. great shape, free to good home. You pick up.
PM me for questions, pictures.
