Indy4x4Fab
1/2 ton status
in need of a complete set of spindle nuts for a gm 14 bolt full floater plus the locking rings with the ears.
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
gm 14b ff spindle nuts needed (found)
- Thread starter Indy4x4Fab
- Start date
6 tab square slot socket style is 2 nuts with washer in the middle.
6 tab round slot socket style is 1 thick nut and square key with lock ring clip.
both can be used.
and dana 60 uses the same threads/pitch as the 14ff . lots of guys run extra set so thay dont have to have 2 spares and sockets.
and i prefer the newer style with the square lock key. thay dont come loose nearly as much as the bend over tab style. old.
6 tab round slot socket style is 1 thick nut and square key with lock ring clip.
both can be used.
and dana 60 uses the same threads/pitch as the 14ff . lots of guys run extra set so thay dont have to have 2 spares and sockets.
and i prefer the newer style with the square lock key. thay dont come loose nearly as much as the bend over tab style. old.
Indy4x4Fab
1/2 ton status
6 tab square slot socket style is 2 nuts with washer in the middle.
this is the style i am looking for.
this is the style i am looking for.
Indy4x4Fab
1/2 ton status
rock auto rules.
