Good Working TH400 4WD

[Upstate]

Not looking for a rebuild or should work, looking for a clean recently pulled TH 400 4WD with 32 spline prefer somewhere near New York.

Thanks

 

[SurfinCR]

i dont know how far you're looking to travel but i have one pulled a little over a year ago from a friend, the fluids were drained, which were clean, and put into my shed. i'm not sure of the spline count but if you're interested i could check

 

[sweetk30]

what tcase you plan on running ? makes a difference in tail shaft needs .

 

[Upstate]

what tcase you plan on running ? makes a difference in tail shaft needs .

I would prefer my '90 NP241 that was to a SM465 or my '87 mated to a SM465 or my NP205 that was mated to a '84 TH400 in that order.

 

[Upstate]

i dont know how far you're looking to travel but i have one pulled a little over a year ago from a friend, the fluids were drained, which were clean, and put into my shed. i'm not sure of the spline count but if you're interested i could check

My work allows me to cover eastern Ohio, all of PA, all of NY and most of the southern parts of VT,NH and Maine and the rest of the NE states.

 

[sweetk30]

for best bet go for 85-up th400 for correct tail shaft then .

 

[thatK30guy]

You can use any 400 that was mated to a 208 from '81 on up.

You can also use any 400 that was mated to a 205 from '85 on up.