CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Got joint?
- Thread starter DEMON44
- Start date
DEMON44
Low-Tech Redneck
in the picture. the size is really deceptive.......I wonder if anyone can get a real handle on how big it is.
Looks like the U-joint cups are about 3" in diameter? 
Rene
Rene
Not sure what its number would be, but I'm guessing its about 6inches across with the caps on.
Whatever size it is its ****ing huge.
Whatever size it is its ****ing huge
.90BCk5
1/2 ton status
the fleetguard filter in the background looks to be comparable, but its a little ways away, that globe valve on the tank isnt too small either, 2-3"??
man, that's a big JOINT
man, that's a big JOINT
DEMON44
Low-Tech Redneck
the driveline runs 2250hp between an Allison S9810 and a big quint frac pump. the u-joint in this driveline is not the weakest link actually. the 12 bolts that hold the flange to the pump input pinion are engineered to be the fuseable link if the pump ever stalls at full power.
BS_k5
Registered Member
Looks like that joint is wider than the pepsi can...
Pepsi can...2.625" diameter. My calibrated eyeball still works. 
Rene
Rene
DEMON44
Low-Tech Redneck
Looks like that joint is wider than the pepsi can...
It is.............
rene still got the laser calibrated eye on
Adventurous 4x4
1/2 ton status
We have some joints about that size on some of our equipment at work. Impressive to see.
