guaging interest. Parting 86' K30

[1967k10]

I'm probably going to be parting an 86' K30 in the next couple weeks unless I sell the whole thing. It's got a good running 454/late 32spline round pattern 465/205, D60/14bolt,ect. Body is kinda rough,but not bad.
A buddy of mine may take the D60 but he's kinda short of $$$$. If anyone is interested in parts let me know and I'll price them out.

 

[nvrenuf]

I'm interested in the hydro clutch pedal assembly.

 

[Tim L]

What gears are in the rear ends

 

[1967k10]

Just the clutch peddle assembly?

It has 4.10's. Where in CO are you?

 

[nvrenuf]

Just the clutch peddle assembly?

Well the clutch and brake pedals both hang from a bracket inside the dash, I'd like as much of that as you're interested in pulling. Ideally, the bracket and pedals as a whole.

If you don't mind, shoot me a price on just the pedal stuff and another with the pedals + the master cyl, resevoir, hose, etc. (I figure the bellhousing will go with the tranny).

Thanks!

 

[chevy_addict]

Second on the clutch pedal assembly with firewall braces if nvrenuf passes on it.

Dave

 

[GRAYTEXK5]

how much for the tranny/t-case, shipped to 76036?

and what about all the brackets and pullies from the 454?

 

[1967k10]

I already have two people that want it whole,but need to see pic's. Here's what I need if I do part it.

D60/14bolt $1500
454 $500
465/205 $450
We'll go from there on the smaller stuff.

 

[1967k10]

I got the truck home last night finally. It's too god to part so I'm going to keep it together if possible.

It's pretty actually strait but has some rust bubbling under the paint in places and the drivers cab corner has a little rust. The pass fender is bent up a little too.It has a gooseneck setup. Could use a tune up and the smog crap removed. I have a set of good old 454 manifolds I'd throw in so the smog ones could be remover. I'd take $2600.

 

[muddybuddy]

post up some pics