What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

H1 wheel spacers!!

sixb

sixb

1/2 ton status
Joined
Feb 11, 2008
Posts
1,161
Reaction score
35
Location
West Jordan UT
This is a stock adapter from a 97 Chevy Dually. Would be perfect for running stock H1s on a 8 lug D44 or 10 bolt.
100.00 plus the ride.
Paypal is preferred.

Thanks.
 
How would they work on a D44 or 10 bolt?

Looks like they just slide over the bearing hub and studs and then you slide an extension thru the hole to snap on a socket to tighten the nuts?
 
yep thay bolt on and move the flang out.

and fyi the studs are 14x1.50 metric. so you will need new lugnuts and also new hold down nuts to hold them to the orignal stuff on the older axles that do 9/16 studs.
 
So would theses spacers work on a 14 bolt so you can run H1's with a dually front?
 
nope only fit ifs 88-up or over 3/4 ton spindle/hub or 14 bolt semi float rear. dana 60 and 14ff to bit to fit the center.
 
ya i have a set and tryed them my self. so thats how i know for sure. figured someone whould ask someday. :thumb:

if thay had made the o.d. on the middle section just a little fatter........ then we could bore the centers and fit them on 14ff and 60's . but not gona happen sorry.
 
Yeah I read a tread about the possibility on using the 60 adapters on the 14 with no results so thought I would ask about these.
 
and your missin the nuts to hold them on the axle. :doah:

mine have them. :whistle:

good luck tho. at least we got the info here for them. :thumb:
 
You must log in or register to reply here.

Latest Posts

Top Bottom