mr250twostroke
1/2 ton status
I bypassed my heater core this past spring in my 01 z71 with the intentions of correcting it before the cold/rain snap here in the PNW. I did the core in my K5 instead (thanks for the write up CK5) and then took on other projects and never got around to the to the pickup. Well it cooled off abit here and some rain showed up (shocking) and foggy windows are no fun. Ironically my K5 is on jack stands thanks to you folks and my new project is under way-14bff/d60,diy stuff so on and so fourth. This leaves me heaterless and scared for my life
. My book for the pickup is a POS and from what I have gathered this fix is a M Fer. If there is already a thread on this I apologize in advance but my searches are frustrating and I havent found one. If someone that has done this already can help or point me towards a thread that covers it, it would be most excellent. Also, if someone has a way to make heat in the cab before the core is swapped Id be interested.
Take care Guys & Gals
Dustin
. My book for the pickup is a POS and from what I have gathered this fix is a M Fer. If there is already a thread on this I apologize in advance but my searches are frustrating and I havent found one. If someone that has done this already can help or point me towards a thread that covers it, it would be most excellent. Also, if someone has a way to make heat in the cab before the core is swapped Id be interested.Take care Guys & Gals
Dustin