My 91 S10 blazer has bad cancer. The body is shot. But it is SO dependable I really hate to get rid of it. Anyways, the upper control arms are very rust and the passenger side has holes in them. Can Anybody help me with a "high quality" used set??
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
HELP!! S10 4x4 upper control arms? low/no rust?
- Thread starter bablazer73
- Start date
2wd or 4x4? I'm not sure if there is even a difference on the upper arms but it is probably best to get the same ones.
R72K5
Banned
i was loooking under a 4x4 s-10 blazer earlier today and it looks like the arms come down way farther( out towards balljoints) than 2wd ones,
4x4 are different. need 4x4
I don't have a 4x4 S10 parts truck but I can get anything you want at the yards around here with no rust on them. Looks like the lowest price on car-part.com was $21 each from a wrecking yard in Spokane...
Spalding Auto Parts USA-WA(Spokane) E-mail 1-800-366-2070
Call them up and see if they will ship directly to you.
Spalding Auto Parts USA-WA(Spokane) E-mail 1-800-366-2070
Call them up and see if they will ship directly to you.
gambit420s
1/2 ton status
ive got a 86 4x4 2dr s-10 blazer i'm bout to scrap, its a pretty nice body and did run&drive well til i sold the motor/trans/case, any thing else you might want? i've got it all, but i'd like to keep the rear diff(new posi+big axles), front clip, skid plates, doors and seats, but the rest is up for grabs, i'd even sell it all as one but no title 
truck was no abs, man tranny, 2.8 red body, red/maroon int, newish shocks,etc
i can hack the frame and send you the whole fr susp cheap, i'd prefer not to take it apart by hand, but i would for the right price, anything you want on a pallet in upstate by next fri
i have lots of S parts if you need newer or whatever
truck was no abs, man tranny, 2.8 red body, red/maroon int, newish shocks,etc
i can hack the frame and send you the whole fr susp cheap, i'd prefer not to take it apart by hand, but i would for the right price, anything you want on a pallet in upstate by next fri
i have lots of S parts if you need newer or whatever
