Help Stephen on 205 tech!

[JeffHK5]

I am in need of some assistence to get my Gen2 doubler project rolling again. I found a np 205 in good shape that would be great for this project and cleaned and disassembled it in preperation for the bore job on the input bearing hole. For one reason or another the case sat for a month until I had time to bore the 3.548 OD , and begin my assy. of the 205. Thats where my problem is, I don't have a clue as to how it goes back together! In my info I got from ORD it states that "a manual is very helpful when doing anything like this". My question is does ORD sell a manual, schematics or a photo parts breakdown of the np203/205? If not then who does?

Thanks for any help
Jeff

 

[4X4HIGH]

I'm pretty sure billavista on Pirate has a nice write up on the 205. IIRC that's who it was. At some point i printed off the whole thing and made a book out of it but it is like 86 pages long with tons of pics.

 

[JeffHK5]

Thanks much !
Jeff

 

[thebigdaddyof2]

Here's an exploded view:

 

[JeffHK5]

Thanks , CK5 saves me again

Jeff

 

[Stephen]

That takes care of that! nice pics.