Help with front end components for suspension rebuild

[Nutro]

I'm almost too embarrassed to ask for more help since that last fiasco. On my 88 I want to rebuild the front end. It h as a 2.5 spring lift on it. I have a drop pitman arm and need to order the tie rods but I am not used to this suspension setup. I googled and looked on Rockauto but need to order from Amazon to kill an account credit.

I saw this pic (Nevermind the comment about having the third setup, I got this pic from Google and I have the middle bar setup)

1. Does anyone know what the part number would be for that middle tie rod bar setup? I think its MOOG DS893

2. I know I need the tie rods that attach to the pitman arm and steering knuckle. Amazon doesn't know the ES027L but they do have a Proforged 104-10017 and Proforged 104-10018. Will the Pro-forge be ok?

3. For the Right side, I just need 1 of the Moog ES2011R

Does that sound about right?

 

[Nutro]

I'm guessing this is a stock pitman and steering arm.

 

[frankin5]

ES2026L ES2027R Amazon drag link

https://www.amazon.com/Moog-ES2027L-Tie-Rod-End/dp/B000C55VXE

https://www.amazon.com/Moog-DS893-Tie-Rod-End/dp/B000C55VUW

 

[Wes Harden]

drag link goes from steering box to steering arm on knuckle, tie rods go from knuckle to knuckle,

 

[sweetk30]

stock pitman and steering arm on the box and axle knuckle .

with 2.5" lift your fine with that combo . i think going drop pitman arm on the box will be over corrected .

the drag link needs a small amount of slop down to the rear at ride height . way to many people over correct and run in to problems .