What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

HELP

B

blazen91

1/2 ton status
Joined
Sep 10, 2000
Posts
1,736
Reaction score
0
Location
Hesperia, Ca 92345
I need a 10bolt axle shaft for my rear(30 spine). My left rear tire was covered in oil so I was going to replace the bearings and seals. The shaft is worn from the bearing going bad. Does some one have one I can borrow til May/June or one I can buy, please let me know. We are going to Big Bear on Saturday.

<A target="_blank" HREF=http://www.blazen91.coloradok5.com>http://www.blazen91.coloradok5.com</A>
Protect the land FOR the people
Not FROM the people
 
Some one has got to have this. Please help!!!!

<A target="_blank" HREF=http://www.blazen91.coloradok5.com>http://www.blazen91.coloradok5.com</A>
Protect the land FOR the people
Not FROM the people
 
Try an axle saver bearing. They move the bearing about a half inch further down the axle allowing you to re-use the axle. They are available at most good parts stores (NAPA, etc.)
 
I'll check that out. Thanks. But the bearing is in all the way now. Is it special design bearing?

<A target="_blank" HREF=http://www.blazen91.coloradok5.com>http://www.blazen91.coloradok5.com</A>
Protect the land FOR the people
Not FROM the people
 
Last March my seal crapped out on me. The guy at the parts counter didnt have an axle available but he said to let the new seal hang out a little or push it in a little further "just for now". Well its been..... what, 9 months and its still holding. I'm getting a little nervous about it though. Just a thought!

creepin' and crawlin'

Jim
 
I changed the seals and bearings(and soaked breaks) today. All I need is a shaft and I'm back in business. The axle is worn down where the bearing rides on it. So it's too lose on the bearing.

<A target="_blank" HREF=http://www.blazen91.coloradok5.com>http://www.blazen91.coloradok5.com</A>
Protect the land FOR the people
Not FROM the people
 
the saver bearing has the seal included and moves the location on the axle where it rides their 25$ I think and kragen has em theyre timkin made in usa.

88k5 silverado w4"lift soon to have <font color=orange>d44 and corp14ff</font color=orange> with 4.56s
 
A reat thanks to all of you for your help. I found one at the trans shhop that did my 700r4 and 14bff. http://www.blazen91.coloradok5.com
Protect the land FOR the people
Not FROM the people
 
You must log in or register to reply here.

Latest Posts

Top Bottom