CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Holley truck avenger 670cfm and tons of parts

RootBreaker

3/4 ton status
 Premium
GMOTM Winner
Joined
Nov 29, 2001
Posts
6,998
Reaction score
1,423
Location
Williamstown, NJ USA
Ok so I cant get my truck through inspection with this truck avenger. I did in 2004 and 2006 but not sure why I cant now.

let me say that I dont know what im doing with carbs... so it most likely is an
ID10T issue... :whistle:

if you have no emissions testing or can "Obtain" a sticker... then you will enjoy this carb. Provides PLENTY of power for me and the little bit of use I have on it handled any angle or hill I threw at it.

I am going to get a qjet and just put it on as I dont need all the power I can get as I just need to pass emissions.
The holley runs great.. i have 0 issues with it other than NJ emissions which are super strict...

this is the holley truck avenger 670cfm model 2 (there was something fixed and holley swapped it for free for v1 owners)
you will get jets (2 of each)

64, 66, 68, (I think 70 and 71 too but not sure)

Discharge nozzles upgraded to I think 35.. stock will be included

accelerator pump cam kit ($25 from everywhere)

also will include the holley adapter to put a holley on an aftermarket dual plane intake (I have the weiand power plus+ intake)

so you should get everything to bolt it on....


so all in all you get
Carb, linkage bolt adapter, Mess-O-Jets, Discharge Nozzles, Acc Pump Cams (all colors) and the holley intake adapter


all for $250 shipped... let me know before it goes to ebay... by this weekend it will be flebayed... :popcorn:
 
Top Bottom