Hub Help

[bdegs]

I have a D70HD DRW and a D60 DRW. I am planning on using H1 wheels with the stock offset. I would like to put SRW hubs on the rear so the track width is the same.

I have been told two different things about the 14FF hubs. Will 14FF SRW hubs fit on my D70HD DRW with no problem???

Thanks for the clarification

 

[kennyw]

I know they are interchangeable on the GM D70 rear axles... I don't see any reason Dodge would have used a different hub spindle design. Easiest way to find out is to see if the spindle locknuts are interchangeable or not. If so I'd try swapping them around.

 

[bdegs]

I know they are interchangeable on the GM D70 rear axles... I don't see any reason Dodge would have used a different hub spindle design. Easiest way to find out is to see if the spindle locknuts are interchangeable or not. If so I'd try swapping them around.

I have a GM D70HD I think. So I should be good? I have to have them shipped so I can't try the spindle nut before I buy them

 

[kennyw]

If it is a GM D70 then it will be interchangeable.