CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

HVAC question

K85 Octane

People Fatigued
 Premium
GMOTM Winner
Joined
Nov 2, 2009
Posts
15,354
Reaction score
5,948
Location
San Bernardino CA
I have AC and heater. Nothing works, not even the fan. Might be my wiring, which is very possible. But, I also have no freon in the system. Does the pressure sensor shut down everything or just the AC?

Just wondering if all I need is freon or re-do my wiring.

Thanks
 
Check the ground wire that connects to the blower motor, the one in my 2wd Burb didn't work either, was just a bad ground. Found this out after searching over a few things, removed the motor and bench tested it only to fid it did work, just wasn't getting any power.

The low pressure switch for the ac system only signals the compressor.
 
damn, I was worried about that. The system was working until I rewired everything with the EZ Kit and emptied the freon, now it doesn't work. Was hoping it was just the freon. The entire system was left untouched except the wires behind the dash. Not much there, not sure how I screwed up, but at least it's not important.
 

Latest Posts

Top Bottom