Hydro Bell Housing?

[loafer]

Can anyone tell if this is a hydro bell housing?

 

[YZEATER]

the pic need to be further forward to be sure,

 

[sweetk30]

cant tell for sure. pic cut off at bell housing face . it will have cast in ear with 2 bolt holes and center hole around 50cent size in middle.

but being a fig 8 early tcase adaptor i am betting not 1 . as 85-91 was years for square body getting hydro and also round 6 adaptors also. unless someone swaped out parts .

------------------------

EDIT : i have a pic saved here ya go.

 

[loafer]

Thanks for the info. I'm going to try and get the guy to send some better pics.

 

[loafer]

So the guy selling this says it's out of an 87 1-ton. Does that make sense? If so that would mean a hydro bell housing.

 

[YZEATER]

if nothing was ever swapped and it is original, it will be hydro.

 

[sweetk30]

not orignal then for tranny / tcase. via that style adaptor between the tranny/tcase. that stoped 84 last year . that style used 10 spline output/input gear with coupler sleave. known to wear out bad over time and some break .

just tell him to send you a pic of the left side of the bell housing like i posted.

 

[YZEATER]

they could have swapped in the tranny and t-case and kept the original bell. that's why i always ask for pics when buying parts trucks that say 'dana 60' axle. most of the time it isn't.

 

[82355]

Also, only crew cabs were still using fixed yoke NP205's after 1979.

Martin

 

[nvrenuf]

...and just to say it outloud, that's not a Chevy truck frame in the pic.

 

[loafer]

I'm going to wait and see if he sends more pics. Otherwise I don't think it's worth the drive. Thanks everyone!