CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

I keep burning out the fuse for the tail lights and dash found a clifford system

phrogs

Registered Member
Joined
Dec 7, 2010
Posts
87
Reaction score
0
Location
Kalamazoo MI
This poor truck had a clifford remote start III installed when it was new.
I have no remotes for this thing and it needs to go.
I know for a fact it is preventing my door locks from working right they unlock when I take out the key but can't get them to work otherwise.
I hope that someone can help me find Instructions for this thing so I can remove it or possibly find remotes for it.
I have looked but haven't found anything yet.


I do not know if this is where my issue is at but I need to handle this issue as well.

The tail light and dash issue happend after about 3 months of driving so I have a short somewhere haven't found it yet.

jp
 
Fixed the light issue.

Traced my harness from the back to the front and found the Brown wire the one for the running lights had rubbed on the frame and over time corroded and shorted out. when I found it and put a little pull on the wire it broke off.

Ended up cutting out about 2 feet of the wire due to corrosion.

Happy now!!:smokin2:
 

Latest Posts

Top Bottom