I need some pictures of parts.

[divorced]

I am looking for some good pictures of some certain parts. The pictures must show the part in detail as they will be used for reference. I will probably post the pics on a website so don't send me anything that is copyrighted, top secret, or that you don't want me to use at my discretion.

Pictures that I need:

1.) Found The cover of a 10 bolt front axle that is still on the axle, and one that is off the axle.

2.) Still need A picture that shows how a front GM D60 has only 1 u-bolt on the passenger side, and how it uses bolts into the differential.

3.) Found A picture of a stock GM D60 steering arm, showing how it is attached with 4 bolts.

4.) Still need A side veiw picture that shows what the steering arm used for crossover steering looks like, and a brand/part number.

5.) Found A front shot of the drag link for crossover steering, from the box to the knuckle.

6.) Still need A shot of a passenger side hi-steer arm on a D44 knuckle.

7.) Found A picture of the hub/drum of a 14 bolt SF axle.

8.) Still need A stock D44/10 bolt steering arm still on the knuckle


You can post your pics here or email them to me at = groundhawgs at gmail.com



Thanks to anyone who can help!

 

[pauly383]

Well I can help with the 10 bolt picture off axle . There are other pics in this article that show some of what you want http://coloradok5.com/crossoversteering.shtml . Someone else will need to show you d60 stuff

 

[86chevybanshee]

here is some

gm d60 steering arm

 

[86chevybanshee]

i dont know if this is much help but

d60 housing and a sf hub (to lazy to go and take the wheel off )

 

[MTBLAZER89]

Think I got a couple of those.

 

[divorced]

Thanks to everyone who has posted pictures, they are a big help. I have edited the list for what has been found and what is still needed.

 

[MTBLAZER89]

This is Sky's crossover arm. Same on in my pics

 

[pauly383]

2.) Still need A picture that shows how a front GM D60 has only 1 u-bolt on the passenger side, and how it uses bolts into the differential.

LOOK CLOSELY AT POST # 4

The pic that was attached by 86chevybanshee shows it . One u bolt would go on pass side , the two holes on the left are for bolts/studs . The spring sits on the perch of course , and springplate over the top

 

[divorced]

LOOK CLOSELY AT POST # 4

The pic that was attached by 86chevybanshee shows it . One u bolt would go on pass side , the two holes on the left are for bolts/studs . The spring sits on the perch of course , and springplate over the top

Ya, it's a good picture of that. I have saved all of the pics so far to use. I left it up there though hoping that someone had a pic with the spring still on. I need these pics for a page I'm making.

 

[jekbrown]

I can take a pic of the passanger side u-bolt/stud setup on my D60 tomorow. I have x-over arms to (from WFO). I dont have many pics of my rig's front end, so I'll grab a bunch for ya.

j

 

[divorced]

I can take a pic of the passanger side u-bolt/stud setup on my D60 tomorow. I have x-over arms to (from WFO). I dont have many pics of my rig's front end, so I'll grab a bunch for ya.

j

That would be great, thanks! Anytime in the next couple days, no real big hurry.