CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

I want to reclaim some space in my shop again

thatK30guy

1 ton status
 Premium
Joined
Jan 12, 2001
Posts
32,580
Reaction score
541
Location
.
So I've priced the stuff below for cheap. They must go. I don't want to scrap or toss them so prices are cheap for you guys to snatch them up.

First up is a set of aluminum DRW simulators, in excellent condition, I think these are new but not sure, complete with hardware and caps, $50 for everything in the pics.

S5003096.JPG
 
Next up is the airgate I listed locally and those of you who know about that thread I made of the lowballer who offered me $10 for it and I replied to him along with his girlfriend/wife for the night. :D

Fits '73 to '87 trucks, straight, no bends, warps, welds, etc., $40 plus the ride.

S5003095.JPG
 
Next up is a rear 3rd bench seat out of a '98 Sub. Its in great shape with no tears or rips anywhere. It does have a small, easily cleaned stain on one headrest, $40 and the ride but not real sure exactly how to ship something like this.

S5003093.JPG
 
Now up is a real good used 30 x 9.50 x 15 tire which would make a good spare or whatever for you, $25 and the ride.

S5003102.JPG
 
Heres a good rebuildable 350 core, non-K-case even though someone drilled the holes on the bell for the thick dust cover, again, its NOT a true K-case, will fit the 203 and 205 t-cases, $40.

I also have a brand spanking new B&M deep aluminum pan/gasket/extension/hardware kit for the same tranny. Buy both the tranny and the pan all for $150 plus the ride.

S5003097.JPG
 
1 rear shaft out of an '80 K20 Sub with a 400/205/14FF setup. $50 plus the ride. This one is in excellent condition.

S5003105.JPG
 
Last edited:
CUCV front and rear shackle brackets and clevis's. Rears are from the non-Blazer trucks and fronts will fit all. Don't really want to sell these but they're taking up space, $200 for everything in the pics plus the ride.

S5003108.JPG

S5003109.JPG

S5003110.JPG
 
NOS hubcaps to fit 1/2 ton wheels, only have the fronts, $40 for the pair plus shipping.

S5003112.JPG
 
3 older style hubcaps, 1 NOS and 2 are in very good condition, $60 for all 3 caps plus shipping. Fit 1/2 tons only.

S5003113.JPG
 
Screw this one, too. Tossed it into the scrap pile at my buddy's place.

S5003116.JPG
 
Last edited:
Bilstein shocks with remote reservoirs, not sure on the numbers or lengths, got these from Greg, if you're serious about these then I'll check for the numbers and lengths, $150 for both plus shipping.

S5003117.JPG
 
Had a spare driver side mirror laying around, $15 plus shipping. In great shape, too.

S5003114.JPG
 
2nd Design passenger side steering knuckle, non flat top style, good spare or replace your broken one. $20 plus the ride.

S5003115.JPG
 
if you can check into the shock #'s, i may be interested.... no rush....
 
Not sure if these are the correct numbers but the sticker shows #AK7114R02 and the valving is 170/60.
 
Not sure if these are the correct numbers but the sticker shows #AK7114R02 and the valving is 170/60.


Part #: AK7114R02. Shaft Diameter: 14mm. Extended Length: 35.04". Collapsed Length: 20.99". Finish: Plated. 14" stroke
 
I'd be all over em, but that valving is a little soft.. thinking i should be running the 255/70's on the front...
 
Top Bottom