any ideas on how you have your inline fuel filter mounted for a qjet?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
inline fuel filter
- Thread starter wazzabie
- Start date
oh sorry I meant addding an additional filter. One like the photo below.
http://www.technilube.com/pics/wix/wix_fuel_filter.jpg
I'm not sure if these need to be secured with a strap or if the fuel hose is sufficient. I assume it would be bad if the touch any hot surface.
http://www.technilube.com/pics/wix/wix_fuel_filter.jpg
I'm not sure if these need to be secured with a strap or if the fuel hose is sufficient. I assume it would be bad if the touch any hot surface.
I always had mine just suspended with fuel line.
But you do certainly need to keep the filter and lines away from things that are hot and things they can vibrate against.
But you do certainly need to keep the filter and lines away from things that are hot and things they can vibrate against.
American84K5
1/2 ton status
I don't even have the internal filter in my qjet anymore.
I just run a inline (like you want) in front of it
I just run a inline (like you want) in front of it
I also replaced the fuel pump. There is the extra bolt that doesn't do any thing by the fuel pump. I'm thinking about placing the fuel filter by the pump and using the bolt to mount it with a strap.
I run a Fram G3 filter before and after the pump.
