input need please

[stunter2boy79]

im looking at a set of 3/4 axles one is a 14 bolt semi and the other is a 10 bolt. both out of 3/4 trucks. axles are either 85 or 86. the guy thinks they are 4.10 gears. the 10 bolt just has the housing and gears. and he has a dana 44 also the same way as the 10 bolt. he wants 75 bucks for all 3. is it worth the drive, which is about 2.5 hrs from me

 

[imiceman44]

im looking at a set of 3/4 axles one is a 14 bolt semi and the other is a 10 bolt. both out of 3/4 trucks. axles are either 85 or 86. the guy thinks they are 4.10 gears. the 10 bolt just has the housing and gears. and he has a dana 44 also the same way as the 10 bolt. he wants 75 bucks for all 3. is it worth the drive, which is about 2.5 hrs from me

Add your fuel to the $75 if you are not going over $200 I would do it.
being 3/4 ton they have to be at least 3.73, possibly 4.10
If you only want them if they are 4.10 then drive up there and check them out and all you lose is the gas.
I just realized they are without outers so that's why no more than $200 for a set, it's what the gears would cost you and you still would need to install them so you are still getting a deal.

 

[stunter2boy79]

ok kool. the 14 bolt is all there, just the 44 n 10 bolt no outers

 

[stunter2boy79]

would a ford ranger be able to handle the weight of the axles?

 

[bot0611]

Yes, just be carefull if you run into traffic giv the guy in front enough distance.