Interior Mods

[fabjunkie]

With a drill. Depending on how many miles are on the truck, it may take a while though.

 

[mouse]

Does anyone make an aftermarket speedo that works with the factory in-speedo VSS?

 

[onetonbb74]

get an electric speedo with no cable and it should work with an electric vss.
try autometer.com. They are called programable and under the more info button on their website, it says will work with most sensors, just call and ask.

http://www.autometer.com/cat_gaugesearch.aspxhttp://http://www.autometer.com/cat_gaugesearch.aspx

 

[shepdog]

custom door panels

Ok guys anybody made some custom door panels?

 

[ARAMP1]

I'm in the process of making some diamond plate inserts for the stock door panels right now.

 

[shepdog]

I like the diamond plate on the bottom of the door-looks pretty good.

 

[1crzy88]

here s a pic of my dash

gauges and back pannels not done yet. I am actually a little further done than this pic shows but this is only one side of the rear. and the last one is to prove that i actually wheel... no show ponys here.

T

PS. that s a 15" lcd tv in the dash. and the rear pannels are 2-10's and a set o 6 1/2 copmonets on each side. should be done in a few weeks.

 

[1crzy88]

this is so you guys don't think that she s a show pony

this was our last weekend camping trip. remember that im still open diffs and this was about three feet tall.

 

[BKinzey]

Nice job but, that dash is scary man!

 

[shepdog]

That's bad ass man! Shoot us some more pics I would like to see ur door panels too.

 

[1crzy88]

there might be some of the door pannels on here. but ill get a few shots tomorrow. and thanks for the comments. Ive done all the work myself, it not that hard, just takes a little time.

 

[Chevy305]

here is mine, not as fancy as ryoken, but ive since added 2 more guages, trans temp, and vacuum.

and another, any one have a center cap for the steering wheel?????

Did you use a 5" speedo and tach in there?

 

[ryoken]

Looks like the 5", as opposed to the 3 3/8"...

 

[onetonbb74]

5" in dash tach and speedo
2 1/16 all other guages

 

[Chevy305]

5" in dash tach and speedo
2 1/16 all other guages

When you unstalled the 5" speedo and tach, did you have to trim the dash bezel?

 

[ryoken]

When you unstalled the 5" speedo and FUEL GAUGE, did you have to trim the dash bezel?

Fixed it for ya....

 

[Chevy305]

Fixed it for ya....

No, I really meant tachometer. Not fuel gauge, look at his pictures. I see a 5 inch speedometer and a 5 inch tachometer.

 

[ryoken]

You thru me with "unstalled"

 

[Chevy305]

ah, I didn't even see that.

ya, I meant installed...

 

[onetonbb74]

yeah, i trimmed the bezel to fit the 5" guages. The only problem is that it doesnt directly face the driver but you can still see them.