Jack Placement

[Dafey]

Can some one post a pic of where and how the jack bolts down? I think I have every thing to bolt it down...but I don't know where it go`s.

 

[dyeager535]

Is this for the '77? Different depending on years.

 

[Dafey]

Yep 77. I`m not lucky enough to have more than one...

 

[Hogback Fabrication]

Mine was bolted to the top of the passenger inner fender.

 

[Randy92782]

mine was on the drivers side but mine's also an 85

 

[Dafey]

Mine was bolted to the top of the passenger inner fender.

But does anyone have a pic or really good description of how its held down , where these screws and bolts go?

 

[Randy92782]

hmm i'll have a pic if i can get some light outside. it's dark now but might get it to work

 

[Randy92782]

sorry man didn't work. too dark out. lighting sucks. i'll try and remmeber to take some tomorrow

 

[Metrodps]

Here is the sticker if that helps. 1973 - 1979 C/K truck

 

[Dafey]

Thanks Metrodps its kinda fuzzy, but if Randy can get a pic , between the 2 It should be perfect.

 

[Metrodps]

Not much of an artist but this might help a little. My memory of my 1979 K20 is it had like a spring thing that hooked over the jack on inner fender.

 

[Randy92782]

well here's what i have left. i took everything out cause it was just in the way for whenever i go to mount something here. hope this give's you somewhat of an idea. the wing nut should have a little hook type deal that holds down the tire tool, jack and jack bar (raises jack). if needed i can round up my jack and bars and put em back to show a better picture
Edit: the bottom of the jack just sits in the plastic tray thing
pics:

 

[Dafey]

Thanks Randy , I think I'm missing a few parts. Like the plastic part for the base of the jack. I have the "J" part to hold things down and a small "L" hook then theres 2 humped small pieces with a bolt on either side. _^_ Side view..LOL.
They look like there meant to hold down the jack handle..

If you wouldn't mind rounding things up and taking a pic , I would appreciate a LOT.

 

[dyeager535]

Your '77 doesn't use that plastic piece.

The picture metrodps posted (and drew ) is your style.

 

[broncoman6524]

hey if youwant i can take a picutre of the inner fenders and like circle the holes i took the mounts off of....if taht might help youout.

 

[Dafey]

Hell yeah , I`ll take all the pics I can get. You know once I figure it out , Im gonna feel like an idiot because its gonna be so simple.

 

[Dafey]

AHHhhhh , told ya I`d feel like an idiot....I figured it out. But I need a bolt and wing nut [ or something ]. HEHE hardware store time ! ! my ol ladys gonna hate that.

 

[Metrodps]

Your '77 doesn't use that plastic piece.

The picture metrodps posted (and drew ) is your style.

What he said!

 

[Randy92782]

well nice to see you figured it out. need anymore help just pm me

 

[Dafey]

THANKS Randy , and everyone else for all the help ! ! ! !