Shot in the dark but does anyone have a good set of usable spring hangers for the rear suspension in a K30 aka 1ton 4wd. Need em for my 2wd conversion.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
K30 rear spring hangers
- Thread starter mrk5
- Start date
54inches
1/2 ton status
socoinslo
1/2 ton status
Not sure what/if the difference is but I have the stock rear hangers off my 1989 V2500 Suburban that I could part with
1ton frame hangers for springs are 1ton only. dont hang out off the frame as far . 1" less per side.
Only 1 ton hangers work. They are closer to the frame. Always figured it was to clear dual rear wheels.
socoinslo
1/2 ton status
Ok... now I know! just thought i would through it out there. good luck finding the 1 tons.
Thanks.
What are you doing with your 2wd hangers?
I have a frame that I am making into a trailer, and it's going on a d70HD so I need 1 ton hangers but I could use the shorter 2wd ones and I can sell you the 4wd ones, just make it worth my time to pull them off the frame.
Let me know.
Sent you a PM
I found out the hard way 2wd to 4wd hangers rivet hole pattern is different .
just so you guys know this .
just so you guys know this .
