buddetaylor
Newbie
i am currently building a 84 k5. i was wondering where i could get driveshafts. it has the np 208 and twelve inches of lift. 10 bolt axles. thank you for any input.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
k5 driveshafts
- Thread starter buddetaylor
- Start date
skidog1us
1/2 ton status
Go to http://www.highangledriveline.com/default.htm, then give Jesse a call, his number is on the site. Very good guy and a ton of people here have purchased his goods.
90BCk5
1/2 ton status
just kinda curious about the 12 inches of lift and 10 bolt axles! what size of rubber you plan on running?
was just thinking that
1BEATK5
1/2 ton status
just kinda curious about the 12 inches of lift and 10 bolt axles! what size of rubber you plan on running?
Be sure to get the driveshafts made a little short and all 1-ton stuff. Connect it to the 10-bolts with adapter U-joints (1330-1350). Then when the 10-bolt axles break, your expensive new driveshafts will still work with the 14B and Dana 60 you end up with later.
And expect a front driveshaft that works with a 12" lift to be hella pricey.
And expect a front driveshaft that works with a 12" lift to be hella pricey.
If my truck had a 12" lift I would need a rope ladder that would fall out when I opened the door to help get my fat a$$ in. I have a hard enough time with a 4" and 37s.
Last edited:
Blazinaire
1/2 ton status
troll
buddetaylor
Newbie
cool, thanks for your input.
Tom Woods will build ALL of my d lines! Awesome work awesome warranties and he is a huge supporter to the sport of off roading and huge help in protecting public lands he's constantly providing shafts for raffles that support the cause. For that he has earned my business for life
ChevyNL
Registered Member
My rear CV driveshaft is also a "Woody"!
Great parts and a nice guy who gives good tech support!
Great parts and a nice guy who gives good tech support!
