8 Months ago I took the intake off my K5 5.7 TBI to replace 2 collapsed lifters. Not realizing It would be this long before I was able to get Bach to the task, I am now on it. However, I cannot remember how the top engine brackets are connected. Can ant body tell me where I can find a pic of these bracket locations. Thanx for any help, Pappee
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
K5 help needed.
- Thread starter Pappee
- Start date
What year K5 and is driver side av with v belts? All this info is important to help you out!
1989 K5 5.7 TBI Serpentine belt W/AC
Single belt or multi belts?
Single
Ok this look similar?
That's drive side
Here is pass side.
If it is let me know to get more pics
Here is pass side.
If it is let me know to get more pics
Those aren't correct for an '89 serpentine.
I would post some pictures of one, but you wouldn't be able to see them since you aren't a premium member. And I don't have any other means to post them.
I would post some pictures of one, but you wouldn't be able to see them since you aren't a premium member. And I don't have any other means to post them.
I am guessing that you are talking about the rods that go to the back of the bracket, behind the tensioner?
One goes by the thermostat housing, one back next to the valve cover, on the intake.
One goes by the thermostat housing, one back next to the valve cover, on the intake.
I am up visiting my wife at the hospital right now but later on this evening when I get back I will finish my app for the premium membership. That was my intention but I have been just overcome by other BS today
I just received the link from Steve to be able to do that. I am a brand-new member and I've been a little lost around this website
Understandable.
I know that some guys can use other photo hosting sites to post pictures, but I don't have one.
I know that some guys can use other photo hosting sites to post pictures, but I don't have one.
Yes as well as the throttle and detention bracket. I am now a premium member
I am now premium member. Appreciate your help
So my '90 has 2 rods going off of the bracket by the tensioner. The throttle stuff is difficult to get a shot of. It does tie to the cruise control servo bracket.
Sorry everything is so dirty and hard to see. It has 290,000 miles....
Sorry everything is so dirty and hard to see. It has 290,000 miles....
