What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Last chance before scrap...'82 K20 parts & more

75-K5

75-K5

3/4 ton status
Joined
Apr 28, 2002
Posts
5,353
Reaction score
0
Location
Anderson, Indiana
I still have many parts left off this '82 K20 and I have to get it to the scrapyard by the end of this week or beginning of next because I'm bringing home a van that I'll need space for. Here is an updated list of some of the things I have:


Steering column (non-tilt, manual version) - $20

Brake booster & MC - $15

Accelerator pedal & bracket (2 avail.) - $7

Brake pedal & bracket (for automatic) - $10

Clutch & brake pedals & bracket w/linkage - $30

"Scottsdale 20" emblems (2 avail.)- $5 ea.

Blue shoulder belts - $10 ea.

Heater control panel - $5

Front 10 bolt 6-lug, needs driver's side lockout, 3.08 I believe - $50

Rear 10 bolt 6-lug, welded, 3.08 I believe - $50

Chrome front bumper, very good shape, with marker lights - $40 (pic on request)

Headlight & engine wiring harnesses(may not be 100% complete) - $5 ea.

Main in-cab wiring harness w/fuse panel(may not be 100% complete) - $7

Windshield (fits '73-'87), no cracks, w/rearview mirror & antenna - $100

Blue sunvisors, OK shape, - $2 ea.

Wiper switch (non-delay) - $1

Wiper motor - $5

Wiper linkage & studs - $5

Parking brake pedal & bracket - $10

Cowl panel, black, no rust, fits '81-'87 (I think) - $10

Heater motor (not sure if it works) - $5

Hood hinges (bolt to cowl) - $5

Power steering boxes (2 avail.) - $15

Taillight lenses (2 avail.) - $2 ea.

Gauge pod for '82 - $25

Individual gauges for '75 - $5 ea. ($10 for speedo)

Plastic dash piece around gauges, one each for '75 and '82 - $5 ea.

Glove box, blue - $5
 
Last edited:
I could use the brake stuff off the front axle assuming you still have it and it isn't totally thrashed. ;) need some parts for a disc brake conversion. lemme know,

j
 
If Jekbrown and Okiemuddog pass on those brake parts, I'm interested in the caliper brackets and hubs (if the rotors are shot, that's ok) to convert my 6-lug 10 bolt to an 8-lug.

thanks

Jeff
 
still waiting to hear something about the brake stuff... has the rig been junked? :(

j
 
Sorry about just now posting. I forgot to mention, I'm keeping the axles to swap into my K5, but anything off the K5 axles is up for grabs. I'll get back with you on the spring hangers, I know one of them is kind of rusty but I can't remember which one. Again, sorry about taking so long to get back with people but on Tuesdays and Thursdays I'm gone from 7:30am to 11pm and gone until 5pm the other days and always have a ton of homework so free time is sparse. I plan on cutting the truck up tomorrow afternoon so I will just pull all useable parts off and put them in a pile.
 
Started tearing the truck apart. I have more things like:

Good windshield w/antenna and rear view mirror: $100
Heater control panel: $5
Misc. wiring harnesses (headlight, engine, in-cab): $5 ea. (no taillight harness)
Scottsdale 20 emblems: $5 ea. or 2 for $10 :p:
Blue shoulder belts: $10 ea.
 
Last edited:
Intrested in the booster and MC, is it in decent condition? It will work on my 78 2wd 1/2 ton right? I have been wanting to convert it to power brakes for the longest time. Let me know, thanks.
 
K5MONSTERCHEV, I don't see why the booster and MC wouldn't work on your truck.

Big4x4ride, I checked on the spring hangers and the ones on this truck are both rusted out beyond repair.

OK, I tore some more stuff off, mainly little parts.
I pulled out the entire main wiring harness including the fuse panel if anybody is in need of that. I've also got tons of little parts, like wiper switch, parking brake pedal assembly, wiper motor, wiper linkage, cowl panel, heater motor, etc. etc. If you can name it I probably have it somewhere, unless I'm keeping it for my own use.
 
rear 3/4 ton u bolt plates ?
factory non a/c truck

heater boxes- inner and outer- with harness and defrost ducts ?

dont need control panel or blower motor though

thanks
 
Sorry, I'm keeping the U-bolt plates to swap the axles into the K5, but I'll get all the heater stuff you asked for and think of a price. Shouldn't be very much, depending on how hard it is to pull. Will work on it probably Friday.
 
ProJunkRacing said:
pedal and linkage how bout quote to 60423 in IL thanks alot
Click to expand...

Which pedal? Sorry, don't have e-brake cable, just the pedal assembly. By in-cab moldings do you mean the rubber weatherstripping or what?
 
does the steering column have the high beams on the column ? .... It's for an 86 k5. And how much for shipping to 06040
 
no i mean do you have the mech clutch linkage and springs that is what i need and i mean the molding the plistic in the cab by the window and all
 
pornorob said:
does the steering column have the high beams on the column ? .... It's for an 86 k5. And how much for shipping to 06040
Click to expand...
No it doesn't, that would be '84-87.
 
You must log in or register to reply here.

Latest Posts

Top Bottom