okieraptor
1/2 ton status
Is there a difference in lengths between 3/4 ton and 1/2 ton leaf springs? Mines a 1/2 and I want 3/4 to help support the extra weight of the diesel.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
leaf springs
- Thread starter okieraptor
- Start date
in the front, no. you might find a few more leafs in the pack though.
Weigh rating and leaf count. Some most C/K1500 came with 52" length springs.
Some C1500 came with 56" springs.
C/k2500 could come with either 52" or 56" length springs.
1500 springs.
2500 springs.
okieraptor
1/2 ton status
Well the fronts are both two springs. Just didn't know if it would just bolt in or not. Also not sure on the back either. But i don't if ill need them in the back. The flat bed shouldn't be to heavy.
Oh sorry, I thought you where doing 52" swap.
They do make different springs for the front.
K1500 front springs.
K2500 front springs.
They do make different springs for the front.
K1500 front springs.
K2500 front springs.
okieraptor
1/2 ton status
See that's what I don't know. Its a stock right now and I want to put heavier springs on so it doesn't squat so I can still run my 32" tires.
The fronts are interchangeable between, 1/2 ton to 1ton, if that's what you know. I believe the diesel was the heaviest motor, so find springs from a 1 ton diesel.
The big block is actually heavier than the 6.2...
Rene
Rene
okieraptor
1/2 ton status
Sweet thanks guys that's what I needed to know.
