CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

leaning 2000 silverado

Geep

Registered Member
Joined
May 9, 2005
Posts
9
Reaction score
0
Location
South Carolina
I have a 2000 Silverado 4x4 w 182k miles. It leans to the drivers side (enough to piss you off), and has done so for about 30-40 k miles. I have replaced the rear leaf springs (the whole ball-o-wax) with new ones, as well as replaced the torsion bars with new 3/4 ton bars. I don't the the frame is twisted, because it seems to lean throughout the length of the vehicle evenly. even when torquing the bars on the driver side it helps only slightly.

I'm not that heavy...

Any ideas?

G
 
even w/ brand new shocks/torsion bars?

I replaced them less than 5k miles ago, about 3 months.

G
 
If the TB's are good then no.

Could be the rear springs. As far as i know you can not incorrectly key a TB when installing it.
 
kinna a dumb question but are youru toursion bars raised up equaly? I have a 99 and have them all the way turned up and one of mine lowered it self
 
Top Bottom