CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
lincoln electric sp-125 plus
- Thread starter k5freak44
- Start date
75-K5
3/4 ton status
btt since I moved it to here. /forums/images/graemlins/thumb.gif
I got my sp 100 back in 91'...
and it still welds like new...
It was one of my better buys..for $500..
So...279 is a steal on a sp 125!!!!
I'd have that one in the back of MY truck.. /forums/images/graemlins/thumb.gif /forums/images/graemlins/thumb.gif
It can be used with gas or flux core wire..
and it still welds like new...
It was one of my better buys..for $500..
So...279 is a steal on a sp 125!!!!
I'd have that one in the back of MY truck.. /forums/images/graemlins/thumb.gif /forums/images/graemlins/thumb.gif
It can be used with gas or flux core wire..
DieselBurb
1/2 ton status
Like I said in the other post:
I have one of the Lincoln 115 volt flux core welders and they wrok great for sheetmetal. I still use the splatter stick welder for thick stuff though. I think the flux core wire welders are good to 3/16 inch thick (don't quote me on that).
I have one of the Lincoln 115 volt flux core welders and they wrok great for sheetmetal. I still use the splatter stick welder for thick stuff though. I think the flux core wire welders are good to 3/16 inch thick (don't quote me on that).
Jeromy Gibson
1/2 ton status
Thats the welder I use mostly. It has gas hookup but I have never used it. I have used it on just about everything up to about a 1/4 inch. Only advice is you have to prep the surface alot more than with a 220 and go slow. when you think you are going to slow that is about right.
