DRW D60 lockouts will work on SRW hubs, right? 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Lockout compatibility
- Thread starter longbedder
- Start date
DRW D60 lockouts will work on SRW hubs, right?
D60 locking hubs are the same, and D50 hubs as well.
Thanks!
the only basic diffrence between drw and srw is the wheel bearing hib/rotor assemlys.
all other parts swap over.
all other parts swap over.
rwright07
1/2 ton status
having s manual hub issue and questions as well... bought a dana 60 with auto hubs, swapped gears and got a set of manuals on ebay. Finally got the axles all together and the manual hubs i bought will not fit.
I checked the auto hubs it came with, and they will fit fine, but the manuals wont. The snap ring/circlip will go in, but there is still a 1/8" gap between the lockout cover and hub body when the cover is fully torqued down.... am i missing something? i thought, as stated above that all 30spline dana 60 internal lockout hubs would work???????????????
I checked the auto hubs it came with, and they will fit fine, but the manuals wont. The snap ring/circlip will go in, but there is still a 1/8" gap between the lockout cover and hub body when the cover is fully torqued down.... am i missing something? i thought, as stated above that all 30spline dana 60 internal lockout hubs would work???????????????
