Looking for a source of Leaf Spring bushings for Rancho lift springs

[RockBottomRacing]

I have a used Rancho 4" spring lift on the garage floor, Rancho gave me a part number but its been discontinued and they apparently don't have record of the spring bushing dimensions. I'm going to probably just pull the old ones out and try and match them up, but does anyone happen to know what size they are by chance? Thought it couldn't hurt to ask lol. I'm also trying to decide if I'm going crossover steering right now or not. I need to replace the steering box anyways, and the drag links and the steering arm and pitman arm and so on, figured I'd maybe throw a few bucks extra into it and get it handled...

Thanks guys!

 

[diesel4me]

I don't know what bushings they used,but back in the day when I was a parts counterman,we had a Moog "numerical listing" catalog that showed all the dimensions of various parts like leaf spring & control arm bushings,coil springs,etc--I spent more than a few hours trying to match up some "custom" bushings on various vehicles that had no listings in the catalogs for those parts..could usually find something suitable..

Not sure if those catalogs are still available,or online --but Rock Auto shows a lot of dimensions if you click on "info" after looking a part up and get the number..might be able to find one that way,but it wont be quick..

 

[HankScorpio]

I went through a similar deal with some skyjackers. I think I used the energy suspension catalog to measure out some that would fit. The catalog selection was pretty extensive.

 

[sweetk30]

http://www.offroaddesign.com/catalog/hdshackles.htm

 

[RockBottomRacing]

http://www.offroaddesign.com/catalog/hdshackles.htm

PERFECT! Thanks a bunch!!! Gonna order bushings and shackles!

 

[1-ton]

http://www.offroaddesign.com/catalog/hdshackles.htm

That was the first place that came to my mind was ORD. Even if you do not know what size bushing you need, as long as you know make, model, year of vehicle, front or rear, and what brand spring you have Steve over at ORD can figure it out for you.