looking for axle beef

[jaysonsk5]

what would you do? i am running a 44 with 5.13 and a trutrack , the rear is a 14bff with 5.13 and it's welded. i'm running 44" boggers and looking to upgrade so here is my question- run what i got and just keep swaping shafts. put a 60 under it and call it good. or put rockwells under it and flog it. looking for some help on this one guys, what would you do?

 

[78Suburban]

Dana 60. If you break that, get alloy shafts. If you break those, you're my hero

 

[sandawgk5]

Dana 60. If you break that, get alloy shafts. If you break those, you're my hero

X2 shipmate

Ira

 

[muddybuddy]

Dana 60. If you break that, get alloy shafts. If you break those, you're my hero

x3

how many chafts have u broken with the 44s on the locked d44...im guessing too many to count

 

[jaysonsk5]

it has a bbc and a 465 and the 208, to date i have only killed one short side but it killed all of the short side, inner outer and the joint, two hubs and the drive shaft. i have only had it out 6 or so times. so i think that it is alittle hard on parts.