Looking for cheap flattop passengers side 10bolt knuckle

[jjlaughner]

Just what it says, I'm trying to sell my project truck but if no ones interested I'm going to try and finish it in the next several months for at least one trip out this summer... so I need parts... Well actually all I need to get it on all fours is a 10-bolt passengers side flattop knuckle, milled drilled and tapped; I have new spicer ball joints ready to go in I just need the knuckle. Don't need the arm unless its cheap and already bolted on!

http://coloradok5.com/forums/showthread.php?p=1471047#post1471047

what do ya got?

 

[kennyw]

You need both knuckles for a 10 bolt. The Dana 44 pass side knuckle is what you need for the flattop and it has the tie rod going the opposite direction as the 10 bolt knuckle.

 

[jjlaughner]

good looking out I forgot about that... been away too long I guess!

 

[kennyw]

good looking

didn't know you liked me that much?

 

[MTMike]

I'm not sure what you call cheap but I have a D44 flattop with 8 month old ball joints milled, drilled & tapped with a WFO crossover arm bolted to it for $200 + the ride.

 

[jjlaughner]

yeah $200 is a little out there for a project I'm not sure will get finished (with the arm aready to bolt on its worth it to someone)
Looking for under $100 shipped, milled drilled and tapped ready for the arms and studs when and if it gets put together... basically I'm trying to get the front axle together and back on all fours and off jack stands...