Looking for Roller Cam Suggestions

[pomai]

88 chevy 5.7 from my Blazer, using a 383 Scat crank balanced rotating assembly with 6" rods, Probe Industries forged flat top pistons, World products S/R torquer 76cc heads, Xtremefi bored 2" TBI, custom TBI chip, JBA headers, CFM Technologies injectors, adjustable fuel presure regulator & spacer. Bow Tie Overdrive 700R4 extrem package, stock converter. Dana 60/ 14 blt, 4.56 gears. 35" tires.

Any roller cam suggestions?

Thanks, Ed

 

[drivelineman]

Well i run a nitrous cam on my big block full roller- next time i will run a mechanical roller though- try for a 525 lift and 280 duration- Jess

 

[pomai]

Well i run a nitrous cam on my big block full roller- next time i will run a mechanical roller though- try for a 525 lift and 280 duration- Jess

I got your rear CV drive shaft & 1480 u bolt yoke for my 14blt and am very happy with it.
Thanks, Ed

 

[88-383]

I run the Accel/Lingenfelter 74219, [email protected] .525 lift/1.5's 280 advertised, 15" vacum at idle 700'ish rpm. Haven't put many miles on it yet, but it's a smooth running cam. It's never stalled on me even with the stock chip at 600rpm idle. It's not a cheap cam, but it's proven to be a strong cam!

KM