jp0863
1/2 ton status
lookin for a spare np241 for my 1989 suburban project. what years and models will work with the 89? i figured if i can find a spare cheap and rebuild it with a sye, then keep mine as a spare just in case.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
looking to find a spare 241
- Thread starter jp0863
- Start date
89 was the only year with the correct side front output and the cable driven speedo. That said perhaps the 90-91 with the sensor can be converted...?
Yup, as far as I know '89 was the only year for the mech speedo 241. Not sure if conversion is possible/practical. If you are going to SYE it, it may not matter. They may be able to get you the right parts to make a 90-91 have a mech speedo with the SYE.
jp0863
1/2 ton status
Hmm, guess there's one way to find out... tear one apart.
Might be just as easy to go electronic speedometer and ditch the cable as it is to convert a '90-91 to mech, especially if the donor is a '90-91.
I certainly wouldn't let that be my limiting factor to a donor. (but I'm partial to the electric setups)
This is assuming stock speedometers.
I certainly wouldn't let that be my limiting factor to a donor. (but I'm partial to the electric setups)
This is assuming stock speedometers.
