What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

LOTS of ****....please help..

aj johnson

aj johnson

1/2 ton status
Joined
Nov 2, 2004
Posts
230
Reaction score
0
Location
Idaho Falls, Idaho
Hey Guys... I'm in a serious cash crunch right now and I need to sell off some of my collection...
Here is a partial list...
Pics on request..
Make me an offer on anything please!
New, never installed (not a wenzel) SBC valve springs and umbrella seals and elgin cam... the cam has some rust on the bearing surfaces from sitting. it got wet in the box somehow.
a couple of 205 T-cases with 10 spline coarse input gear
several 700R4 to 208/241 adapters
Several chevy 6 hole rims.
one brand new in the box TH350/NP205 coupler sleeve
I THINK I have the TH350/205 adapter as well.
lots of 10 bolt parts, some D44 parts too.
couple of sets of premium 10 bolt/D44 hubs. Warn, Milemarker, and Superwinch. I have all 3.
some 14B parts,need to look through them.
GM SBC 1989 serpentine belt setup, includes AC compressor, alternator, crank pulley, water pump pulley, and PS pump.. EVERYTHING you need for serpentine belt on your SBC
1989 GM TBI setup, complete. computer, wiring harness, sensors, Extreme-Fi worked TBI unit. the bores have been opened to 50MM,new throttle bushings and bigger butterflies to match, TBI spacer added, and adjustable Fuel Pressure Regulator added as well.
SBC Vortec heads Crosswind air gap intake, polished finish. sorta like the Edelbrock Performer RPM intake. Never installed, just shelf dust on it.
hmmm.. a few power steering pumps too.. have one that is a remote reservoir as well.(Matt, you reading this?!?!?!)
One complete Oxy/Acetylene torck setup minus tanks...
A Craftsman Twin Blade saw http://www.popularmechanics.com/home...s/1274396.html
plus tons of other ****... if its a chevy part you need, PM me and I'll see if I got it!
I really need some cash right now, so anything you guys want, please ask and let me know.
Thanks
AJ
 
OH yeah... also, a 79 shortbox 4X4 chev.. a PO tried installing dual tanks... the tank and filler is there, but it isn't plumbed in. BRAND NEW windshield installed in it. 350/TH350/203 driveline 3.08 gears and 33" mixmatch tires(yeah, I know, it sux) runs good. soon to have a working wiper motor, that's bout all it needs... as well as a regear. I have a pair of 10 bolts i'll throw in too that are 3:.73's the ront is a D44 and the rear is a 12 bolt with a gov-lock, I think...
 
aj johnson said:
couple of sets of premium 10 bolt/D44 hubs. Warn, Milemarker, and Superwinch. I have all 3.
AJ
Click to expand...


How much for the Warn hubs? Also looking for a spool for a 12 bolt. Could you send me a pic of the warns?
 
Last edited:
Vortec heads... 170 cc or 206 cc intake runners?
Is the intake/heads matched?
What grind is the cam, and how bad is that rust?
Do you have tappets for the cam, hydraulic or mech, flat or roller?

And how much to pack it to 67220? :D
 
aj johnson said:
1989 GM TBI setup, complete. computer, wiring harness, sensors, Extreme-Fi worked TBI unit. the bores have been opened to 50MM,new throttle bushings and bigger butterflies to match, TBI spacer added, and adjustable Fuel Pressure Regulator added as well.
Click to expand...

aj johnson said:
SBC Vortec heads Crosswind air gap intake, polished finish. sorta like the Edelbrock Performer RPM intake.
Click to expand...


How much shipped to 90808?
 
aj johnson said:
lots of 10 bolt parts, some D44 parts too.
couple of sets of premium 10 bolt/D44 hubs. Warn, Milemarker, and Superwinch. I have all 3.
Click to expand...

I hear you on fundage, I'm in the same boat.....But I need a set of Warn Premium hubs for dana 44, how much shipped to Mesa, AZ 85202?
 
Hubs, I'd like $50 shipped.. several ppl are interested in them, so first one with cash in my hand/paypal/whatever gets them.
I only have the 2 sets in the pics.
 
make me an offer on the cam, lifters, springs and umbrella seals.. they aren't of any use to me, I don't have any more SBC's... only yota and caddy engines now.
 
how much for one of them ps pumps w/ the remote resivoir? do they work? are the brackets different on the first gens?
 
I'll pass on the locking hub's for now.... Do you have 3:73 gears for a 12 bolt? What kind of shape are the R&P? How much do you want shipped to Mesa, AZ 85202? I really need a set for my black blazer so I can run a front drive shaft and maybe go out with the boys once in a while....
 
You must log in or register to reply here.

Latest Posts

Top Bottom