LS1 harness

[A1971Blazer]

I'm looking to get a standalone harness for a 2001, cable throttle body, LS1/4L60E

Motor came from a Transam, complete take-out with an un-cut harness.
Time is my main concern about doing it myself.

This will be going into a 1971 K5 and there is tons of other work that I can do with the time it would take me to do the research and rework the harness myself.

I did some searching here with some decent results but some online searches have turned up varying opinions/reviews.

Just wondering if there was a consensus opinion of who does the best rework?

 

[Babaganoosh]

Check eBay I found a Howell harness cheap.

 

[Russell]

I like Voodoo Injection stuff. Josh does very nice work.

 

[A1971Blazer]

anyone dealt with Speartech?

 

[brans87]

Talked to John before and he really knows his stuff and makes top notch harness. I know a bunch of guy's that build P/T cars that use his harness in there swaps with no complaints or issues.

 

[blazinzuk]

Voodoo injection. Josh West. Although he still has about a week before he gets back to work. Just had a full knee replacement last week

 

[ssyork]

I went with voodoo and am completely happy, would use again. Great looking work, very nice fuse box included

 

[brans87]

So did you order a harness yet?

 

[A1971Blazer]

So did you order a harness yet?

Not yet, still got a wagon load of other stuff to do, but I want to order it pretty soon so that I can get this motor in the chassis and fire it up periodically.

 

[eagle mark]

Dave W from Old School makes the nicest harness for the best money in my book!

http://www.gearhead-efi.com/Fuel-In...yout-(Universal)&p=40392&viewfull=1#post40392

 

[brans87]

Didn't see a price but saw a very nice clean harness!

 

[A1971Blazer]

I talked to the guy at LT1Swap.com and he will reprogram the PCM for 75.00 (remove vats, egr, rear O2 sensors...etc.)
but doesn't rework the harness...
BUT.....
he recommended a guy in Middle TN that does the harness rework for 280.00 http://www.lsxharness.com/
Also met a guy yesterday that has HP Tuner software and messes with the LS engines.
He was needing some custom CNC machining for a part he wants to patent...

 

[eagle mark]

I talked to the guy at LT1Swap.com and he will reprogram the PCM for 75.00 (remove vats, egr, rear O2 sensors...etc.)

But I do these simple stock motor transplants for CK5 members for $50. plus the shipping ?

 

[A1971Blazer]

But I do these simple stock motor transplants for CK5 members for $50. plus the shipping ?

OK then......why didn't you say that?...... J/K.....you did!
sending PM

 

[A1971Blazer]

But I do these simple stock motor transplants for CK5 members for $50. plus the shipping ?

Mark,
thanks again for your help.....much appreciated