anyone willing to try a np208 sye on my parts for me...?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Machinist needed...
- Thread starter Big Ray
- Start date
If you get the back half of a dodge 208 case, I *believe* its a bolt up sort of swap to the front half of chevy 208. I bought the parts to do it 15yrs ago and never got around to it and ended up selling them.
My son and I both wish that he could work on personal things with the 5 axis that he operates...
From what I've read the output shaft gets trimmed and tapped, and the output housing is trimmed and bored for a seal.
I did research on the dodge parts years ago. A member here was trying it about the time I joined. It wasn't easy but he did it as I recall..
I did research on the dodge parts years ago. A member here was trying it about the time I joined. It wasn't easy but he did it as I recall..
Its doable with the dodge stuff, I was gonna get one a year or so ago but my shaft worked..... They're around but not as common
Couldn't copy the pic, but this is what I'm talking about...
NP208 Slip Yoke Eliminator Kit
NP 208 SYE Do not confuse ours with other kits where you are required to drill & tap the output shaft on the transfer case. Because of the surface hardness on the main-shaft, this can be very difficult to do. Beyond that, the “kits” others offer, do not shorten the output shaft, you merely bolt...
4xshaft.com
Would be curious to see how they modify the shaft.
As I understand it, they cut it to length then tap a hole for the flange retaining bolt.
