This is a 6" stroke 1.5" bore ram with the swivel eyes from surplus center.
One end has been cut and rewelded so the hoses point straight up, used about a year, still in good condition with no leaks. $65 plus shipping
6 lug wheel bearing hubs-I have 6 of them, some have usable rotors and some do not. Would like $25 each or $100 for all of them plus shipping, I can take the rotors off for less weight on shipping price if you like.
Factory aluminum intake for small block, needs to be cleaned but otherwise good condition with egr block off $75
Pontiac style q-jet (same as chevy but fuel line comes straight out the front) recently cleaned and installed on my trail rig which will only run on 6 cyl and has a rod knock so I dont know for sure how it runs. Choke is removed but I will include all the parts-$100
Chevy style q-jet, ran good when I used it but its been sitting for about a year now so it will need a rebuild-$50
W-style crossmember, think I paid $65 plus shipping from a member here, would like that back
Flat style crossmember Ill take the same $65 plus shipping on this one.
Have some 56" springs from 86 3/4 ton have surface rust like all of them but in good shape $150 plus shipping which will be a killer on these heavy suckers but Ill do it if you want.
Factory 2 leaf front springs in good condition but need bushings-one has been removed already-$75 plus shipping
Everything is plus shipping and you'll have to be patient with me on shipping, if it wont fit in flat rate nearest ups place is 35 miles away and I can usually only make it by there on weekends. Some of this stuff will go on ebay by the end of this week, I need it gone so I can have some more room in my shop.
One end has been cut and rewelded so the hoses point straight up, used about a year, still in good condition with no leaks. $65 plus shipping
6 lug wheel bearing hubs-I have 6 of them, some have usable rotors and some do not. Would like $25 each or $100 for all of them plus shipping, I can take the rotors off for less weight on shipping price if you like.
Factory aluminum intake for small block, needs to be cleaned but otherwise good condition with egr block off $75
Pontiac style q-jet (same as chevy but fuel line comes straight out the front) recently cleaned and installed on my trail rig which will only run on 6 cyl and has a rod knock so I dont know for sure how it runs. Choke is removed but I will include all the parts-$100
Chevy style q-jet, ran good when I used it but its been sitting for about a year now so it will need a rebuild-$50
W-style crossmember, think I paid $65 plus shipping from a member here, would like that back
Flat style crossmember Ill take the same $65 plus shipping on this one.
Have some 56" springs from 86 3/4 ton have surface rust like all of them but in good shape $150 plus shipping which will be a killer on these heavy suckers but Ill do it if you want.
Factory 2 leaf front springs in good condition but need bushings-one has been removed already-$75 plus shipping
Everything is plus shipping and you'll have to be patient with me on shipping, if it wont fit in flat rate nearest ups place is 35 miles away and I can usually only make it by there on weekends. Some of this stuff will go on ebay by the end of this week, I need it gone so I can have some more room in my shop.
Last edited:
