Missing piece of locking hub

[chris85]

Does anyone know where I can find the thick "shim" that is in the top of the first pic? I was cleaning up the hubs and noticed the center section of the main body (pic 2) was loose on one. Took them both apart and found I was missing the thick shim. Called warn but they aren't open today. Go figure. Thanks!

 

[chris85]

Guess I should have mentioned that these are the warn standard hubs off a CUCV Dana 60. Looked at rebuild kits but none that I've found have these pieces.

 

[nvrenuf]

My guess is you have to find a used main body assembly or go to Warn (which I bet doesn't service that separately). That mechanism is not usually taken apart when serviced unless there's a locking issue.

Also, if it's a true shim, are you certain that one needs it?

 

[chris85]

The thick piece sits in between the center piece and the larger locking body, acting probably more like a bearing than a shim. Without it the center piece has a lot of play which makes me think it's needed.