mix'n'match

[BlackBourbon]

Alright, I tried searching trust me. I've been piecing together stuff for crossover. I found the d60 steering arm and dropped pitman(made by shakerbuilt). Now I'm just looking for the draglink and ends. I was pm'ed on another forum from a guy that said....

"Ive got 2 Poison Spyder/Avalanche 2926R ends and jamnuts and tube adapters I havent used, $65 shipped."

Are these any good? worth the price? easy to find the right draglink for?

He said the tubing needs to be at least 1.5in od .25inch wall 1inch id.

I've tried looking up poison spyder and avalanche but no websites. If I can find a draglink to fit I still dunno if the pitman/steering arm are the same ream.

Guess I should just buy ORD's draglink and TRE's huh?

 

[BlackBourbon]

Haha, 0 out of 29 people have heard about them.....guess I'll pass

 

[bp71k5]

Poison Spyder/Avalanche 2926R ends and jamnuts and tube adapters I havent used,

Those are ends with adaptors that you weld into a tube that you bend yourself. I'd guess you are better off buying a kit that is known to fit together since the draglink length is dependant on what kind of pitman arm and steering arm are being used.

 

[muddermilitia]

Posion spyder/avalanche is good stuff. I dont think avalanche is making much for the offraod community anymore I remember hearing they were building stuff for the military. Poison spyder just recently went out of business, but they made quality parts

 

[BlackBourbon]

Those are ends with adaptors that you weld into a tube that you bend yourself. I'd guess you are better off buying a kit that is known to fit together since the draglink length is dependant on what kind of pitman arm and steering arm are being used.

oh, i'm a dumba$$ haha. So when he said the pipe needs to be 1" inner diameter it's so the adaptor can get welded in. then the inside of the adapter is the regular 7/8" inside with the ends to thread into. I have a bender and can get any tubing cheap as hell. I was being retarded. brainfart

 

[nvrenuf]

Iirc, arms may be tapered different sizes based on the ends a given manufacturer intended to use. You might start by finding out what Shakerbuilt says you need before buying ends you can't use.