Motor Mounts Needed

[biobry]

<font color="blue"> Does anybody have a pair of Clamshell motor mounts laying around they don't need? I need a set to bolt my 350 into my 76 Blazer, Thanks in advance! Oh, I will be more than happy to pay for shipping and reasonable compensation! </font>

Bryan /forums/images/graemlins/k5.gif

 

[jjlaughner]

the metal plate that attaches to the frame or the rubber bushing? The bushings are 7-8$ at autozone (wherever). I have the actuall steel plates that bolt to the frame that the motor mounts bolt onto. they where for a 350 and out of a 79 pickup. PM me if thats what you need /forums/images/graemlins/waytogo.gif

 

[ljbear]

Is this what you are looking for?

 

[biobry]

Yes, that is what I need, the part that bolts to the frame. I bought the new mounts that bolt to the engine already, but couldn't find the lower mounts (only the replacement rubber bushing)

Thanks

Bryan /forums/images/graemlins/k5.gif

 

[ljbear]

[ QUOTE ]
Yes, that is what I need, the part that bolts to the frame.

[/ QUOTE ]

Bryan,

These don't come apart, or they don't seem to /forums/images/graemlins/dunno.gif. If you want them how does $5 + shipping sound. If you are interested pm an address and I'll see what the shipping would be, they weigh about 5 lbs in a box.

Larry

 

[R72K5]

ones in above pic are frotn and rear engine mounts 72 and older

clamshell common mounts didnt exist til 73 except for 72 big blocks

biobry has to find a pair of 73-up 4x4 frame mount plates

jlaughner is on the correct page regarding this also he knows aboutt he mounts design change in 73

good luck