What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Moving sale lots of parts!!!!

P

pseudomike

1/2 ton status
Joined
May 11, 2007
Posts
726
Reaction score
0
Location
MA
Ranch 4" front springs like new $100

Hydro Clutch pedal Setup $125

Tilt/Cruise/Delay column for factory MT w/key $125

Tilt/Cruise/Delay column for factory AT w/key $50

Good used GM Doors (2 pass, 2 driver, set of rear for suburban/crew) $100 each

TN Diesel Conversions 6BT cummins motor mounts $150

Headliner trim set for reg. cab $200

Headliner trim set for crew cab $200

Lund visor, stripped and primed w/new set of bolts $125

89-91 quad light radiator support with like new GMC grille set exc. conditon $275

Usable tailgate with trim panel, some dents, some rust bubbles $60

Nice OEM 1 ton tailgate (lights across top), blasted, primed, zero rust, complete with defect free oem trim panel $250

VAC A/C box setup $100

Hydroboost setups $100each

3.54 gear set for dana 60 front axle $50

Dana 70 rear axle, 3.54 gears, out of '99 Cummins ram, no spring perches $100

1 Ton Rear springs hanger sets, oem, good shape, $50/set

Various emblems/badges, Silverado 30, Sierra Classic 3500, 3+3, Silverado 20 etc. etc

Various drives hafts for 73-87 Trucks, send measurements

Set of 33x12.50x16.5BFG AT rollers, legal tread but not great $100

Front bumper off '91 suburban, has valance and impact strip, chrome, mint, $75

CUCV front shackle hanger $50

CUCV frame lengthened for a crew cab with short bed, has been blaster, primed, painted, really nice shape $250

'88 C30 crew cab, no title, needs rockers, possibly floor work, $100


Also have storage unit full of interior trim panels, bezels, seat belts, gauge clusters, window regulators, and other misc parts so on. I have other stuff, this is what comes to mind off-hand.

Prefer pickup on larger items but I can handle shipping anything. PM for shipping quotes or use the sticky link for weights and figure shipping via your choice carrier from 01370.
 
Last edited:
Are the braided hoses front or rears? I need a pair for rear disc swap on 14bolt. Thanks
 
There are two front hoses one rear. So I guess that is standard configuration? They are good to 6" of lift.
 
pseudomike said:
There are two front hoses one rear. So I guess that is standard configuration? They are good to 6" of lift.
Click to expand...

Ok, well I need the line to axle but I have 8" so I'll keep looking. Thanks for getting back to me quick. :waytogo:
 
I can look but I am thinking no on the belts. What color do you need. It's hard to say for sure picture 15yrs worth of messing with these trucks stuck in a shop. Lot of beers ago so anything is possible. THese would be for a K5 right?

1979jimmy350 said:
do you have any rear seat belts?
Click to expand...
 
Braided Stainless Brake hoses $50
Click to expand...

Interested, will these fit a 3/4 ton axle and calipers? Specifically, mine is an 87. Most of your stuff is one ton and I'm not sure what is interchangeable. If they will fit, I want.
 
pseudomike said:
GM Dana 60 SRW 4.10 gears, newer king pins , spicer u-joints, spicer tire rods. Sale Pending

ORD Shackle flip kit new, 1 Ton, 2 1/2", I painted it black but complete and never seen anything but the garage$150

ORD FUSH front shackle hangers new $125 sale pending

Ranch 4" front springs like new $100

Inline tube stainless brake line set new $150 sale pending Darn i just ordered mine last week.

Braided Stainless Brake hoses $50 I will take them if the guy in front does not.

Hydro Clutch pedal Setup $125

Tilt/Cruise/Delay column for factory MT w/key $125

Tilt/Cruise/Delay column for factory AT w/key $50

Good used GM Doors (2 pass, 2 driver, set of rear for suburban/crew) $125each

Energy Suspension body mounts $40 for PU

TN Diesel Conversions 6BT cummins motor mounts $150

Headliner trim set for reg. cab $200

Headliner trim set for crew cab $200

6.5ft fleet side bed, really solid, has been blasted and primed by professional shop, new tail pan installed, few dings, needs very minor rust repair, have the sheetmetal to repair, no gate $600

Fuel tank for 8' bed truck, newer GM with GM brackets and straps, setup for a diesel with CUCV filler $75

Lund visor, stripped and primed w/new set of bolts $125

89-91 quad light radiator support with like new GMC grille set exc. conditon $275

Usable tailgate with trim panel, some dents, some rust bubbles $60

Nice OEM 1 ton tailgate (lights across top), blasted, primed, zero rust, complete with defect free oem trim panel $250

VAC A/C box setup $100

Hydroboost setups $100each

3.54 gear set for dana 60 front axle $50

Dana 70 rear axle, 3.54 gears, out of '99 Cummins ram, no spring perches $100

Trailer Hitch $50

1 Ton Rear springs hanger sets, oem, good shape, $50/set

Various emblems/badges, Silverado 30, Sierra Classic 3500, 3+3, Silverado 20 etc. etc Do you have a custom 30 or custom deluxe 30 set?

Various drives hafts for 73-87 Trucks, send measurements

Set of 33x12.50x16.5BFG AT rollers, legal tread but not great $100

2wd C30 Steering box $50

Front bumper off '91 suburban, has valance and impact strip, chrome, mint, $75

CUCV front shackle hanger $50

CUCV frame lengthened for a crew cab with short bed, has been blaster, primed, painted, really nice shape $250

'88 C30 crew cab, no title, needs rockers, possibly floor work, $100

Good set of 14 bolt drums, srw, the big ones with srw hubs

Also have storage unit full of interior trim panels, bezels, seat belts, gauge clusters, window regulators, and other misc parts so on. I have other stuff, this is what comes to mind off-hand.

Prefer pickup on larger items but I can handle shipping anything. PM for shipping quotes or use the sticky link for weights and figure shipping via your choice carrier from 01370.
Click to expand...

Shipping on that stuff to 88012?
 
pseudomike said:
I can look but I am thinking no on the belts. What color do you need. It's hard to say for sure picture 15yrs worth of messing with these trucks stuck in a shop. Lot of beers ago so anything is possible. THese would be for a K5 right?
Click to expand...

Yes they would be for a k-5 and i dont care on color i just need something for my backseat passangers
 
shipping to 78729 on the lines?

They will work for a 10 bolt and 14 bolt setup, correct?
 
Last edited:
your pm box is full, What is shipping on the pedals and the cummins mounts to 39201 business address
 
oldtoyboyd said:
your pm box is full, What is shipping on the pedals and the cummins mounts to 39201 business address
Click to expand...


Sorry about that Inbox cleared.

Looks like Shipping is around $30 FedEx ground. I guestimated the weight for both at 25lbs. I'm not gonna split hairs over the shipping, call it $300 even for both and if it's a little more I'll eat it. Something you are interested in shoot me a PM.
 
Sorry, brake lines went with the axle.

Shipping on the springs will be on the order of $100 fedex ground. If you got an account with them might save you 15%. Still cheaper than a new set. These are like new. Drove some 500 miles with them never off road etc then rolled a project truck aroundd the shop for a couple years. They are like 45# each. I am working in Virginia next week, driving down could drop them @ a fedex there but don't know if cost savings will be substantial. I used to have a fedex account but didn't keep it up so I can't get an accurate number on what the discount would be.
 
pseudomike said:
Sorry, brake lines went with the axle.

Shipping on the springs will be on the order of $100 fedex ground. If you got an account with them might save you 15%. Still cheaper than a new set. These are like new. Drove some 500 miles with them never off road etc then rolled a project truck aroundd the shop for a couple years. They are like 45# each. I am working in Virginia next week, driving down could drop them @ a fedex there but don't know if cost savings will be substantial. I used to have a fedex account but didn't keep it up so I can't get an accurate number on what the discount would be.
Click to expand...

Well when you do that, give me a holler. If it totals less than 180-200 i'll take them for sure.

So i guess im calling dibs on the springs until you can get a shipping cost next week if thats alright.
 
You must log in or register to reply here.

Latest Posts

Top Bottom